草莓A字架_草莓立體種植槽_PVC草莓槽_華耀農業

草莓A字架_草莓立體種植槽_PVC草莓槽該技術是利用3-4層分層式框架，在框架上放置栽培容器，在容器內種植草莓的1種栽培技術。這個分層式框架主要分為A字型和階梯形2種。栽培架要按照南北向排放，為光照條件和減少遮光，排放時應選取適當?shù)脑耘嗉荛g距。架式栽培包括基質栽培和水培2種形式。以A字型栽培架栽培為例。A型栽培架主體框架為鋼結構，左右兩側栽培架各安裝3-4排栽培槽，層間距40cm，距地面5m，高處2m，栽培架寬1.3m左右；栽培槽一般用PVC材料制作，直徑為20cm；立架南北向放置，各排栽培架間距為70cm。該形式操作方便，大大減輕了勞動強度。單位面積栽培架上栽培的草莓數量是平地栽培的2倍，產量比原來提高倍。
Strawberry A-frame_ Three dimensional strawberry planting trough_ PVC strawberry trough this technology is a kind of cultivation technology which uses 3-4 layer layered frame, places the cultivation container on the frame, and plants strawberry in the container. This layered frame is mainly divided into A-shape and ladder shape. In order to ensure the light conditions and reduce the shading, the proper spacing of the planting racks should be selected. Trellis culture includes substrate culture and hydroponics. Take A-shaped cultivation as an example. The main frame of A-type cultivation frame is steel structure, 3-4 rows of cultivation grooves are installed on the left and right sides of the cultivation frame, the layer spacing is 40cm, 5m from the ground, 2m from the highest position, and the width of the cultivation frame is about 1.3m; the cultivation groove is generally made of PVC material, with a diameter of 20cm; the vertical frame is placed in the north-south direction, and the spacing of each row of cultivation frames is 70cm. The form is easy to operate and greatly reduces the labor intensity. The number of strawberries cultivated on the shelf per unit area is twice that of flat cultivation, and the yield is twice as high as the original.

草莓立體栽培優點:
一：方便操作
立體式栽培的草莓，便于采摘果實，降低了勞動強度。
二：節約土地
傳統模式的草莓栽植密度為12～15萬株/hm2，改用立體栽培模式后，栽培總量可達40. 5萬～45. 0萬株/hm2，相當于傳統平地栽培的3 倍，節約土地2/3 以上，產品產量是原來的3 倍。
三：改善植株發育
草莓生長對水肥條件要求較高，常發生連作障礙。而采用立體無土栽培，可按要求任意選配基質和營養液，不受土壤條件的限制，同時可根據草莓的生理特點和各階段生長對水肥的需求，調節營養液濃度，使草莓生長發育始終處于佳狀態。
Advantages of three-dimensional Strawberry Cultivation:
1： Easy to operate
Strawberries planted in three-dimensional way are easy to pick fruits and reduce labor intensity.
2： Saving land
The planting density of strawberries in the traditional mode is 12~15 × 10 000 plants /hm2. After the three-dimensional cultivation mode is used, the total cultivation amount can reach 405 thousand ～ 450 thousand plants /hm2, equivalent to 3 times of the traditional flat cultivation, saving more than 2/3 of the land, and the product yield is 3 times of the original.
3： Improve plant development
Strawberry growth requires high water and fertilizer conditions, and continuous cropping obstacles often occur. However, with the three-dimensional soilless cultivation, the substrate and nutrient solution can be selected at will according to the requirements, not limited by the soil conditions. At the same time, the nutrient solution concentration can be adjusted according to the physiological characteristics of strawberries and the demand of water and fertilizer for each stage of growth, so that the growth and development of strawberries will always be in the best state.

安平縣華耀育苗設備廠生產白色pvc立體種植槽，此款產品主要根據草莓種植的要求,特點精心設計出來的種植槽.此產品非常適合草莓的種植,是目前市場上的產品.草莓立體種植槽尺寸為上口寬30cm,底寬20cm,高為25cm.我廠一直本著信譽,質量,服務的生產理念將我產品全國各個城市以及出口到其他國家
Anping Huayao seedling equipment factory specializes in the production of white PVC three-dimensional planter, which is specially designed according to the requirements and characteristics of strawberry planting. This product is very suitable for strawberry planting, and is a high-quality product on the market at present. The size of strawberry three-dimensional planter is 30cm wide at the top, 20cm wide at the bottom and 25cm high. Our factory has always been based on reputation and quality, The production concept of \"service first\" sells my products to all cities in China and to other countries

查看全部介紹