TMS135 軍標級標識套管保護套管
應用
是專為電線電纜標識而設計，由輻照交聯耐溫135℃柔軟高阻燃聚烯烴材質制成，具有的電氣性能、物理性能、化學性能和打印性能，方便提供給標識打印機直接打印，標識持久，適用于線束、線纜的持久標識。
特性
?收縮比：3:1, 2:1
?軍標級
?的打印性能，持久標識。
?的電絕緣性能、物理性能和化學性能
?柔軟、高阻燃
?符合ROHS、REACH環保規范
顏色
?標準顏色：白色、黃色
?其他顏色可定制
操作溫度范圍
?連續使用溫度范圍：-55℃～135℃
?低起始收縮溫度：70℃
?低完全收縮溫度：110℃
符合標準
?SAE AMS-DTL-23053/5
?UL224 125℃ 600V VW-1
?SAE AS 81531,MIL-STD-202
性能指標
性能 指標要求 測試方法 典型值
縱向收縮率 ≤10％ ASTM D 2671 ≤5％
抗張強度 10.4MPa min ASTM D 638 ≥12MPa
斷裂伸長率 200％ min ASTM D 638 ≥400％
老化后斷裂伸長率
(熱老化175℃,168小時) 100％ min ASTM D 638 ≥400％
熱沖擊
無裂紋 ASTM D 2671 無裂紋
低溫柔軟性
（-55℃，4小時） 無裂紋 ASTM D 2671 無裂紋
絕緣耐壓和擊穿 2500V,60sec,不擊穿 ASTM D 2671 不擊穿
擊穿強度 19.7 KV/mm min ASTM D 2671 ≥25KV/mm
體積電阻率 1014??cm min ASTM D 876 ≥1014??cm
腐蝕性 無腐蝕 ASTM D 2671 無腐蝕
阻燃性 1分鐘內自熄 ASM-DTL-23053 通過
打印性能 50次橡皮擦，可辨認
30次來回擦，可辨認 SAE SA81531
MIL-STD-202 通過
抗液體
（23℃，24小時） 打印吸識別 SAE AS81531 通過
規格尺寸
規格 收縮前（mm） 完全收縮后(mm) 適用線纜范圍（mm）
英制 公制 內徑(min) 內徑(max)
3:1
3/32 Ф2.4 2.4 0.8 0.9~2.0
1/8 Ф3.2 3.2 1.1 1.1~2.7
3/32 Ф2.4 2.4 0.8 0.9~2.0
3/16 Ф4.8 4.8 1.6 1.8~4.1
1/4 Ф6.4 6.4 2.1 2.3~5.5
3/8 Ф9.5 9.5 3.2 3.5~8.1
1/2 Ф12.7 12.7 4.2 4.6~10.8
3/4 Ф19.1 19.1 6.3 7.0~16.3
1 Ф25.4 25.4 8.5 9.3~21.6
11/2 Ф38.1 38.1 13.5 15.0~33.0
2 Ф50.8 50.8 17.5 19.0~48.0
2:1
3/32 Ф2.4 2.4 1.2 1.3~2.3
1/8 Ф3.2 3.2 1.6 1.7~3.1
3/16 Ф4.8 4.8 2.4 2.5~4.7
1/4 Ф6.4 6.4 3.2 3.3~6.3
3/8 Ф9.5 9.5 4.8 4.9~9.0
1/2 Ф12.7 12.7 6.4 6.6~12.0
3/4 Ф19.1 19.1 9.5 10.0~18.5
1 Ф25.4 25.4 12.7 13.0~24.5
11/2 Ф38.1 38.1 19.1 21.0~37.0
2 Ф50.8 50.8 25.4 27.0~48.0
其他規格尺寸可定制


TMS135 Military Grade Heat Shrinkable UVProtection Sleeve for Markers
Application
Special designed to meet the requirement of high performance identification of wire and cable. It is made of superior flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. Permanent printing property can be widely used for high-performance identification of wire and cables in industrial, military, areospace, etc.
Characteristics
?Shrink ratio: 3:1, 2:1
?Military grade
?Excellent printing property, permanent identification
?Excellent electrical, physical, chemical and printing properties.
?Flexible, highly flame-retardant.
?ROHS and REACH compliant
Color
?Standard color: White, yellow
?Other colors are available upon request.
Operating Temperature Range
?Operating temperature: -55℃～135℃
?Minimum shrink temperature: 70℃
?Minimum fully recovery temperature: 110℃
Approvals
?SAE AMS-DTL-23053/5
?UL224 125℃ 600V VW-1
?SAE AS 81531,MIL-STD-202
Property
Property Requirement Test method Typical data
Longitudinal shrinkage ≤10％ ASTM D 2671 ≤5％
Tensile strength 10.4MPa min ASTM D 638 ≥12MPa
Elongation at break 200％ min ASTM D 638 ≥400％
Elongation after aging
（175℃,168hrs） 100％ min ASTM D 638 ≥400％
Heat shock
No crack ASTM D 2671 No crack
Low-temperature flexibility（-55℃,4hrs）
No crack
ASTM D 2671
No crack
Dielectric voltage withstand 2500V,60sec,no breakdown ASTM D 2671 No breakdown
Dielectric strength 19.7 KV/mm min ASTM D 2671 ≥25KV/mm
Volume resistivity 1014??cm min ASTM D 876 ≥1014??cm
Copper corrosion No corrosion ASTM D 2671 No corrosion
Flammability Self-extinguishing within one second ASM-DTL-23053 Pass
Printing performance 50rubs, legible
30strokes, legible SAE SA81531
MIL-STD-202 Pass
Fluid resistance（23℃，24hrs） Printing legible SAE AS81531 Pass
Sizes
Size As supplied (mm) After recovered(mm) Recommended
use range
（mm）
inch mm Inside diameter(min) Inside diameter (max)
3:1
3/32 Ф2.4 2.4 0.8 0.9~2.0
1/8 Ф3.2 3.2 1.1 1.1~2.7
3/32 Ф2.4 2.4 0.8 0.9~2.0
3/16 Ф4.8 4.8 1.6 1.8~4.1
1/4 Ф6.4 6.4 2.1 2.3~5.5
3/8 Ф9.5 9.5 3.2 3.5~8.1
1/2 Ф12.7 12.7 4.2 4.6~10.8
3/4 Ф19.1 19.1 6.3 7.0~16.3
1 Ф25.4 25.4 8.5 9.3~21.6
11/2 Ф38.1 38.1 13.5 15.0~33.0
2 Ф50.8 50.8 17.5 19.0~48.0
2:1
3/32 Ф2.4 2.4 1.2 1.3~2.3
1/8 Ф3.2 3.2 1.6 1.7~3.1
3/16 Ф4.8 4.8 2.4 2.5~4.7
1/4 Ф6.4 6.4 3.2 3.3~6.3
3/8 Ф9.5 9.5 4.8 4.9~9.0
1/2 Ф12.7 12.7 6.4 6.6~12.0
3/4 Ф19.1 19.1 9.5 10.0~18.5
1 Ф25.4 25.4 12.7 13.0~24.5
11/2 Ф38.1 38.1 19.1 21.0~37.0
2 Ф50.8 50.8 25.4 27.0~48.0
Other sizes are available upon request.

查看全部介紹